Showing 241–256 of 282 results
Product Description Triumph Bonneville T140/ TR7 (1979-1982) Pushrod Tube Collar Sleeve Made in England. Sold individually. OEM: 71-7196
Product Description Clutch back plate Oil seal Triumph T90/T100 350/500cc(1967-72), T100/TR5T 500cc (1972-74), T120/TR6 650cc (1967-72) OEM: 70-7565
Product Description Clutch mainshaft nut for Triumph T120,T140 1968-1983 models. 9/16″ UNF thread x 18TPI It is a self locking nut so no tab-washer is required. Made In England O.E.M : 21-0586 (S586)
Product Description Triumph Clutch centre – Countersunk Screw – Screws for the clutch hub centre front plate thread diameter is 13/64″, total length is 9/16″ and the thread pitch is 28 TPI (U.H.). Fits Triumph 650 Twins (Bonneville, T120R, TR6R, Etc) from 1963-1970. Fits Triumph 350 & 500 Unit Twins (Tiger, 3TA, T100A, Daytona, Etc)…
Product Description Triumph Clutch Centre Inner Plate. Suitable for: Tiger 90 T100 TR6 T120. For all 3 spring clutches up to 1972. This type is fitted with 3 screws. Made in England. OEM: 57-1720 (T1720)
Product Description Clutch plate to suit 300 /500 /650 /750cc. Unit and pre-unit Triumph twins 5T /6T /3TA /5TA /T90 /T100 /TR6 /T110 /T120/ T140 1946-1983 BSA A7/ A10 swinging arm 1958-1962 B31/ B33 B31 B34 1958 on A50 A65 1962-1972 Inside diameter – 106mm Outside diameter – 155mm stub length – 6mm OEM: 57-1362…
Product Description
Product Description Triumph 5T, 6T. T100 5TA, T100A (1954-1962) Clutch Spring – 4 Spring version (early models) Sold per spring Length – 2″ (51mm) Diameter – 5/8″ (16mm) O.E.M : 57-0999 (T999) 42-3273, 68-3236
Product Description Clutch Spring Nuts Triumph 350/500/650/750 Pre Unit and Unit Twins BSA A7,A10 models with 4 spring clutch, BSA A50,A65 models (1965-72). OEM: 57-2526, T2526, 42-3199, T427, 57-0427
Product Description Key – Woodruff- Clutch All Models S66-1 1939-1983 Clutch hub to gearbox mainshaft key, prevents the clutch hub turning on the shaft.Also used to position the rotor on some models. Length: 0.61″ 5/8″ (15.5mm)Height: 0.238″ 1/4″ (6mm)Width: 0.153″ 5/32″ (4mm) O.E.M : 41-0673, 41-673, 40-3150, 60-4253 (D4253), 21-0661 (S66-1) 68-3218, 70-8144 (E8144) Made…
Product Description Suitable for Triumph Twins, Pre-Unit and Unit Models: T100 1958 5TA Speed Twin 1958-70 TR5T Adeventurer/Trophy Trail 1973-74 6T Thunderbird 1963-70 TR6 Trophy 1963-74 T120 Bonneville 1963-74 O.E.M : 57-1570 (T1570)
Product Description Kupplungsfederstift. Anzüge: Triumph Zwillinge 1951-1983, O.E.M: 57-4754, Made in the UK.
Product Description Triumph Pre Unit 350/500/650cc 4 Spring Models Clutch Pressure Plate Thrust Button (1946-62) Clutch push rod cup for all pre unit models with a 4 spring clutch – 3T, T85, 5T, TR5, T100, 6T, TR6 and T120 models. Measurements: ID: 1/4″ (6.5mm) OD excluding lip: 3/8″ (9.5mm) OEM: 57-0422
Product Description Triumph Pre Unit Clutch Cush Rubber Small Clutch cush rubber (4 spring models) Fits 5T, 6T, Tiger 110, T100 and T120 Bonneville. 4 needed per bike OEM: 57-1473
Product Description Triumph T110, T120 Clutch Push Rod 5 Plate Clutches O.E.M 12 1/4″ LENGTH O.E.M 57-1552, Made In England
Product Description Triumph primary chain adjuster: O.E.M: 70-9703 650 500 unit 70-4153 T120 TR6 T100 Made in the United Kingdom
No products in the cart.
