Description

Belt to Chain conversion kit – 23/51

Fits 2000-2006 Harley Sportster XL models while maintaining stock gearing ratio

Features:

• Black 23 tooth front sprocket with a .500″ offset.
• Includes sprocket nut with locking holes to ensure that the sprocket stays tight.
• 51 tooth rear sprocket with a 9.8mm offset (Includes wheel spacer with 2.1″ ID)
• Designed to fit 2000-2006 Harley Sportster XL models while maintaining stock gearing ratio.
• Also available for other years and models.

NOTE: These are made for use in a stock Sportster frame or a frame or hardtail which uses stock spacing (such as hardtails which use the stock rear wheel assembly, brake, and axle spacers). If the frame you are using is a different axle plate spacing (width) or you are using a non-stock wheel this may affect the rear sprocket alignment. This is for use with a stock width wheel, and is not for a wide tire conversion.

NOTE: Remember a larger sprocket on rear means more torque (geared down) and a larger front sprocket means higher gears, more top end.

NOTE: Because of tight clearance when using stock muffler mount or stock passenger peg mounts do not use an O-ring chain because the additional width may cause chain to wear at these components on deceleration.

Finish:

• Front Sprocket – Black
• Rear Sprocket – Chrome

Fitment:

• Designed to fit 2000-2006 Harley Sportster XL models while maintaining stock gearing ratio.