Fuel Injector Clinic 1650cc (180lbs) Injectors, Set of 82014-2019 Corvette, 2016-2019 Cadillac CTS-V & 2016-2024 Camaro SS & ZL1

Description

Description

Details:

• Cylinder Quantity: 8
• Impedance: High-Z
• Fuel Type: Gasoline, E85, Ethanol/Methanol
• Injector Height: 64mm
• Top/Bottom O-Ring: 14mm

Features:

• These injectors utilize the latest technology and provide great linearity and short pulse width repeatability.
• Injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.
• Flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.
• Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.
• Injectors are set up to and include all O-rings needed to fit the factory application.

Max Wheel HP Rating at 90% Duty Cycle

NA / Gas, 43.5psi	1924 HP
NA / Gas, 58psi	2221 HP
NA / E85, 43.5psi	1480 HP
NA / E85, 58psi	1709 HP
Supercharged / Gas, 43.5psi	1748 HP
Supercharged / Gas, 58psi	2019 HP
Supercharged / E85, 43.5psi	1345 HP
Supercharged / E85, 58psi	1553 HP
Turbo / Gas, 43.5psi	1603 HP
Turbo / Gas, 58psi	1850 HP
Turbo / E85, 43.5psi	1233 HP
Turbo / E85, 58psi	1424 HP

Fuel Injector Clinic Injector Set: 8x1650cc/min (160lbs/hr) at 3 bar (43.5psi) fuel pressure and 180lbs/hr (1900cc/min) at OE 58psi (4 bar) fuel pressure. Saturated / High Impedance Injectors.

This injector set is precisely matched using Fuel Injector Clinic’s proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.

Fuel Injector Clinic’s 1650cc/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.

The 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!

Note: In order to be conservative, Fuel Injector Clinic recommends a maximum duty cycle of 90%

Part Number: IS300-1650H

Warranty Information

Every injector is covered against failure caused by defects in original manufacture by Fuel Injector Clinic’s lifetime warranty.

Vehicles